Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
Figure 4-49 Target Settings
¾
Target Description - Here displays the description about the target and this
description is unique.
¾ Information - The target can be an IP address, a port, or a domain name.
¾ Modify - To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1. Click the Add New… button.
2. In Mode field, select IP Address or Domain Name.
z If you select IP Address, the screen shown is Figure 4-50.
1) In Target Description field, create a unique description for the target (e.g.
Target_1).
2) In IP Address field, enter the IP address of the target.
3) Select a common service from Common Service Port drop-down list, so
that the Target Port will be automatically filled. If the Common Service Port
drop-down list don’t have the service you want, specify the Target Port
manually.
4) In Protocol field, select TCP, UDP, ICMP or ALL.
z If you select Domain Name, the screen shown is Figure 4-51.
1) In Target Description field, create a unique description for the target (e.g.
Target_1).
2) In Domain Name field, enter the domain name in the blank. You can enter 4
domain names.
3. Click the Save button.
Click the Delete All button to delete all the entries in the table.
-86-