Rosewill RNWB-11001 Network Router User Manual


 
300M Wireless N Router RNX-N300RT User Manual
¾ UDP-FLOOD Packets Threshold (5~3600) - The default value is 500. Enter a value
between 5 ~ 3600. When the current UPD-FLOOD Packets number is beyond the set
value, the Router will startup the blocking function immediately.
¾ Enable TCP-SYN-FLOOD Attack Filtering - Enable or Disable the
TCP-SYN-FLOOD Attack Filtering.
¾ TCP-SYN-FLOOD Packets Threshold (5~3600) - The default value is 50. Enter a
value between 5 ~ 3600. When the current TCP-SYN-FLOOD Packets numbers is
beyond the set value, the Router will startup the blocking function immediately.
¾ Ignore Ping Packet From WAN Port - Enable or Disable Ignore Ping Packet From
WAN Port. The default setting is disabled. If enabled, the ping packet from the
Internet cannot access the Router.
¾ Forbid Ping Packet From LAN Port - Enable or Disable Forbid Ping Packet From
LAN Port. The default setting is disabled. If enabled, the ping packet from LAN cannot
access the Router. This function can be used to defend against some viruses.
Click the Save button to save the settings.
Click the Blocked DoS Host List button to display the DoS host table by blocking.
4.9.3 Local Management
Choose menu “Security Local Management”, you can configure the management rule
in the screen as shown in Figure 4-41. The management feature allows you to deny
computers in LAN from accessing the Router.
Figure 4-41 Local Management
-78-