Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
For example: If you desire that the wireless station A with MAC address
00-0A-EB-B0-00-0B and the wireless station B with MAC address 00-0A-EB-00-07-5F are
able to access the Router, but all the other wireless stations cannot access the Router, you
can configure the Wireless MAC Address Filtering list by following these steps:
1. Click the Enable button to enable this function.
2. Select the radio button “Deny the stations not specified by any enabled entries in the
list to access” for Filtering Rules.
3. Delete all or disable all entries if there are any entries already.
4. Click the
Add New...
button.
1) Enter the MAC address
00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F
in the MAC
Address field.
2) Enter wireless station A/B in the Description field.
3) Select Enabled in the Status pull-down list.
4) Click the Save button.
5) Click the Back button.
The filtering rules that configured should be similar to the following list:
4.6.4 Wireless Advanced
Choose menu “Wireless → Wireless Advanced”, you can configure the advanced
settings of your wireless network.
-61-