300M Wireless N Router RNX-N300RT User Manual
¾ Connect on Demand - You can configure the Router to disconnect from your Internet
connection after a specified period of inactivity (Max Idle Time). If your Internet
connection has been terminated due to inactivity, Connect on Demand enables the
Router to automatically re-establish your connection as soon as you attempt to
access the Internet again. If you wish to activate Connect on Demand, check the
radio button. If you want your Internet connection to remain active at all times, enter
“0” in the Max Idle Time field. Otherwise, enter the number of minutes you want to
have elapsed before your Internet connection terminates.
¾ Connect Automatically - Connect automatically after the Router is disconnected. To
use this option, check the radio button.
¾ Connect Manually - You can configure the Router to make it connect or disconnect
manually. After a specified period of inactivity (Max Idle Time), the Router will
disconnect from your Internet connection, and you will not be able to re-establish your
connection automatically as soon as you attempt to access the Internet again. To use
this option, click the radio button. If you want your Internet connection to remain
active at all times, enter "0" in the Max Idle Time field. Otherwise, enter the number in
minutes that you wish to have the Internet connecting last unless a new link is
requested.
)
Note:
Sometimes the connection cannot be terminated although you specify a time to Max Idle
Time because some applications are visiting the Internet continually in the background.
Click the Save button to save your settings.
)
Note:
If you don't know how to choose the appropriate connection type, click the Detect button
to allow the Router to automatically search your Internet connection for servers and
protocols. The connection type will be reported when an active Internet service is
successfully detected by the Router. This report is for your reference only. To make sure
the connection type your ISP provides, please refer to the ISP. The various types of
Internet connections that the Router can detect are as follows:
z PPPoE - Connections which use PPPoE that requires a user name and password.
z Dynamic IP - Connections which use dynamic IP address assignment.
-50-