Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
the screen as shown in Figure 4-44.
Figure 4-44 Access Control Rule Management
¾
Enable Internet Access Control - Select the check box to enable the Internet
Access Control function, so the Default Filter Policy can take effect.
¾ Rule Name - Here displays the name of the rule and this name is unique.
¾ Host - Here displays the host selected in the corresponding rule.
¾ Target - Here displays the target selected in the corresponding rule.
¾ Schedule - Here displays the schedule selected in the corresponding rule.
¾ Action - Here displays the action the Router takes to deal with the packets. It could
be Allow or Deny. Allow means that the Router permits the packets to go through
the Router. Deny means that the Router rejects the packets to go through the Router.
¾ Status - This field displays the status of the rule. Enabled means the rule will take
effect, Disabled means the rule will not take effect.
¾ Modify - Here you can edit or delete an existing rule.
To add a new rule, please follow the steps below.
1. Click the Add New… button and the next screen will pop-up as shown in Figure 4-45.
2. Give a name (e.g. Rule_1) for the rule in the Rule Name field.
-81-