Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
Figure 4-24 Wireless Advanced
¾ Transmit Power - Here you can specify the transmit power of Router. You can
select High, Middle or Low which you would like. High is the default setting and is
recommended.
¾ Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval
here. The beacons are the packets sent by the Router to synchronize a wireless
network. Beacon Interval value determines the time interval of the beacons. The
default value is 100.
¾ RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the
packet is larger than the specified RTS Threshold size, the Router will send RTS
frames to a particular receiving station and negotiate the sending of a data frame.
The default value is 2346.
¾ Fragmentation Threshold - This value is the maximum size determining whether
packets will be fragmented. Setting the Fragmentation Threshold too low may result
in poor network performance because of excessive packets. 2346 is the default
setting and is recommended.
¾ DTIM Interval - This value determines the interval of the Delivery Traffic Indication
Message (DTIM). A DTIM field is a countdown field informing clients of the next
window for listening to broadcast and multicast messages. When the Router has
buffered broadcast or multicast messages for associated clients, it sends the next
DTIM with a DTIM Interval value. You can specify the value between 1-255 Beacon
-62-