Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
Step 2: Choose “Enter the new device's PIN” and enter the PIN code of the wireless
adapter in the field after PIN as shown in the figure above. Then click Connect.
)
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen
Step 3: For the configuration of the wireless adapter, please choose “Enter a PIN into
my access point or a registrar” in the configuration utility of the WPS as below,
and click Next.
The WPS Configuration Screen of Wireless Adapter
)
Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure
shown.
Method Two: Enter the PIN from my Router
Step 1: Get the Current PIN code of the Router in Figure 4-3 (each Router has its unique
PIN code. Here takes the PIN code 12345670 of this Router for example).
Step 2: For the configuration of the wireless adapter, please choose “Enter a PIN from
my access point” in the configuration utility of the WPS as below, and enter the
PIN code of the Router into the field after “Access Point PIN”. Then click Next.
-36-