Filter
Top Products
300M Wireless N Router RNX-N300RT User Manual
Name Status Indication
Off
Power is off.
Power
On
Power is on.
On
The Router is initializing.
Flashing
The Router is working properly.
System
Off
The Router has a system error.
Off
The Wireless function is disabled.
WLAN
Flashing
The Wireless function is enabled.
Off
There is no device linked to the corresponding port.
On
There is a device linked to the corresponding port but
there is no activity.
WAN,
LAN 1-4
Flashing
There is an active device linked to the corresponding port.
Slow Flash
A wireless device is connecting to the network by WPS
function. This process will last for about 2 minutes.
On
A wireless device has been successfully added to the
network by WPS function. The LED will keep on for about
5 minutes.
WPS
Quick Flash
A wireless device failed to be added to the network by
WPS function.
Table 1-1 The LEDs Description
)
Note:
1) After a device is successfully added to the network by WPS function, the WPS LED
will keep on for about 5 minutes and then turn off.
2) When press and hold the WPS/Reset button for more than 5 seconds, you will reset
the router.
-12-