Filter
Top Products
202
3. Useful Setting Menus
Copy
1
Copy feature
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 32).
To change the menu options:
In copy mode, press (Menu) > Copy Feature on the control panel.
• C46xW: When the Scan to button’s LED is off, the machine is in copy
mode.
• C46xFW: Press (copy) on the control panel.
Item Description
Original Size Sets the image size.
Reduce/Enlarge
Reduces or enlarges the size of a copied image (see
"Reduced or enlarged copy" on page 59).
If the machine is set Eco mode, reduce and
enlarge features are not available.
Darkness
Adjusts the brightness level to make a copy that is
easier to read, when the original contains faint
markings and dark images (see "Darkness" on page 58)
Original Type
Improves the copy quality by selecting the document
type for the current copy job (see "Original" on page 59)
Layout
Adjusts the layout format such as poster, clone, ID copy,
2/4-up, booklet, etc.
Layout > 2-up or
Layout > 4-up
Reduces the size of the original images and prints 2 or 4
pages onto one sheet of paper.
This copy feature is available only when you
load originals into the document feeder.
Layout > ID Copy
prints one side of the original on the upper half of the
paper and the other side on the lower half without
reducing the size of the original. This feature is helpful
for copying a small-sized item such as business card.
Item Description
1 2
1 2
3 4