Filter
Top Products
Fax
206
3. Useful Setting Menus
4
Sending setup
Some menus may not appear in the display depending on options or
models. If so, it is not applicable to your machine (see "Menu overview" on
page 32).
To change the menu options:
• Press (fax) > (Menu) > Fax Setup > Sending on the control panel.
Rcv. Forward
Forwards the received fax to other destination by a fax
or PC. If you are out of office but have to receive the fax,
this feature may be useful. See "Forwarding a received
fax" on page 249.
Secure Receive
Stores the received fax in memory without printing out.
To print received documents, you need to enter the
password. You can prevent your received faxes from
being accessed by unauthorized people (see "Receiving
in secure receiving mode" on page 252).
Add Page
Adds additional documents to a reserved delay fax job
(see "Adding documents to a reserved fax" on page
247).
Cancel Job
Cancels the delayed fax job which is saved in memory
(see "Canceling a reserved fax job" on page 247).
Item Description
Item Description
Redial Times
Sets the number of redial attempts. If you enter 0, the
machine will not redial.
Redial Term Sets the time interval before automatic redialling.
Prefix Dial
Sets a prefix of up to five digits. This number dials
before any automatic dial number is started. It is useful
for accessing a PABX exchange.
ECM Mode
Sends faxes using error correction mode (ECM) to
makes sure the faxes are sent smoothly without any
error. It may take more time.
Fax Confirm.
Sets the machine to print a report whether a fax
transmission was successfully completed or not. If you
select On-Error, the machine prints a report only when
a transmission is not successful.
Image TCR
Prints a transmission report with a minimized image of
the first page of the fax sent.
Dial Mode
Sets the dialing mode to either tone or pulse. This
setting may not be available depending on your
country.