Filter
Top Products
Communication and Connection 42
1.
From the
Today
screen, touch
Start
()
> WiMAX CM
.
– or –
Touch ( ) from the left side of the device screen to
launch the Main Menu screen and touch
Basic Settings >
Mobile WiMAX CM
.
Locating your MAC ID
Your MAC ID is a device specific identification that is required
prior to gaining access to a wireless system. Your device’s
internal Bluetooth, Wi-Fi, and Mobile WiMAX components all have
a specific and unique MAC ID. It is this alphanumeric sequence
which you must obtain prior to registration of your device for use
on the CLEAR WiMAX network.
1. From the
Today
screen, touch
Start
()
> Settings
.
2. Touch the
System
tab, then tap
Version
().
3. Scroll down this Version page and locate the Mobile
WiMAX section wherein you will see the MAC value listed.
4. Write down this alphanumeric string and use it during your
registration process.
Warning!:
This is a unique wireless ID and should be kept secured. It is
recommended that you properly dispose of any written record of
this ID after registration.
Online setup for Mobile WiMAX Access
If you have not already created a CLEAR service account, you will
need to do so prior to connection. Without an active account,
your device only allows access to the main
www.clear.com
Web
page.
There are three current methods for creating a CLEAR account:
•
Directly from your Mondi (page 43).
•
Log into www.clear.com and click
CLEAR Services
.
•
Call CLEAR at 1-888-888-3113 and follow the audio prompts.
Important!:
It is recommended that you setup and register your device online
via a computer with access to the Internet.
SWD-M100.book Page 42 Tuesday, July 21, 2009 1:42 PM