Filter
Top Products
105
Overlapped Clerk Entry
This function allows you to switch from one clerk to another clerk and to interrupt the first clerk’s entry. So
the second clerk can do his or her entry in this mode. Interrupt handling is possible only in the overlapped
clerk entry. For actual use of this function, contact your authorized SHARP dealer.
• The overlapped clerk entry is available only in the clerk entry system.
• The overlapped clerk entry is not effective while the tendering sale is going on.
• If any clerk is still making an entry (or has not finalized the transaction yet), the POS terminal
does not run in any mode other than REG and MGR, and no X/Z reports can be printed. The
message “CLERK REMAINED” and the related clerk are displayed.
Clerk 1: Entry started
Clerk 2: Clerk change (1 to 2), interrupt initiated
Clerk 2: Transaction finished
Clerk 1: Clerk change (2 to 1), entry restarted
1
3
3
3
x
2
c
1
3
c
Display
Key operation
Example
NOTE
Clerk 1 is assigned.
(Clerk key 1 is
inserted.)
Clerk 2 is assigned.
(Clerk key 2 is
inserted.)
Clerk 1 is assigned.
(Clerk key 1 is
inserted.)