Filter
Top Products
146
Select a pertinent key no. from the
key numbers list.
In the case of selecting “044 DIRECT PLU”
• TYPE (Use the selective entry)
PLU: Assigns the key as a direct PLU key.
DEPT: Assigns the key as a direct department key.
• You can also select a direct PLU key by pressing the
corresponding key when the PLU has been assigned directly on
the keyboard instead of selecting the key from the menu.
• When selecting a department, the screen on which a department
code is to be entered (the message “DEPT. CODE”) will appear.
• LEVEL1 through 10 (Use the numeric entry)
Enter a PLU code for each level. For example, if you want to
use this key as PLU code 1 (level 1) and PLU code 101 (level
2), enter 1 for “LEVEL1” and 101 for “LEVEL2.”
Key numbers
• You can assign departments and PLUs only the “Departments
and PLUs programmable area” shown above.
• You cannot assign a department or a PLU to the position to
which a function key has been assigned.
• On UP-800F,
?
is positioned in place of the
Ï
key.
NOTE
25 34 43 52 61 70 79 88 97 106 115
816243342516069788796105114
715233241505968778695104113
614223140495867768594103112
513213039485766758493102111
412202938475665748392101110
311192837465564738291100109
21018273645546372819099108
191726 35 44 53 62 71 80 89 98 107
RECEIPT
RECEIPT
124 133 142
123 132 141
122 131 140
121 130 139
120 129 138
119 128 137
118 127 136
117 126 135
116 125 134
Departments and PLUs programmable area
NOTE
Procedure
▼
▼
▼
Direct Key Programming
Use the following procedure to select direct-key programming:
■ Direct key
You can assign departments and PLUs directly to the keyboard. In the case of PLUs, you may assign up to
10 levels to be accessed directly on the keyboard. For key no. positions, refer to the illustration shown below.
The screen continues.