Filter
Top Products
232
Options
List of Options
For your UP-800F/810F POS terminal, the following options are available:
For details, contact your authorized SHARP dealer. Do not try to install any options yourself.
1. External printer model TM-T88III/T88IV, TM-U220/230 or TM-U295*
2. Remote customer display model UP-P20DPB
3. Remote drawer model ER-03/05DWB
4. Remote coin case model ER-48CC2, ER-48CC3 or ER-58CC
5. Remote coin case cover model ER-01CV1-5, ER-02CV1-5 or ER-03CV
6. RAM memory board model UP-S04MB2
7. Magnetic card reader model UP-E13MR3
8. EFT interface model UP-I04EF
9. Contactless clerk keys model UP-R10CL2
* The external printer TM series are not SHARP products.
17
Before Calling for Service
The malfunctions shown in the left-hand column below, labeled “Fault,” do not necessarily indicate
functional faults of the machine. It is therefore advisable to refer to the “Checking” shown in the right-hand
column before calling for service.
• The display does not illuminate.
Fault Checking
• Is power supplied to the electric outlet?
• Is the power cord plug out or loosely connected to
the electrical outlet?
• Is the power switch in the “ON” position?
• Is the terminal in screen-save mode?
• No receipt is issued.
• Printing is unusual.
• Is the receipt paper roll properly installed?
• Is there a paper jam?
• Is the receipt function in the “OFF” status?
• Is the print head release lever at the printing
position?
• Is the print head release lever at the printing
position?
• Is the paper roll properly installed?
• The display is illuminated, but the whole machine
refuses entries.
• Is a cashier code assigned to the POS terminal?
• Is a clerk code assigned to the POS terminal?
• Is the POS terminal in the REG mode?