Filter
Top Products
125
12
Programming
This chapter explains how to program various items.
Before you start programming, select the PRICE, PGM1, PGM2, AUTO
KEY or SD CARD mode from the mode selection screen depending on the
item you are going to program.
Basic Instructions
This section illustrates the basic programming by using an example of programming for departments.
PGM1 MODE
PRICE MODE
AUTO KEY MODE
SD CARD MODE
PGM2 MODE
■ Programming screen
Opening screen: When you select the PRICE, PGM1, PGM2, AUTO KEY or SD CARD mode from the mode
selection screen, your display will show a programming opening screen corresponding to the
mode you selected.
Code selecting screen (Dept. PLU/EAN, Customer):
Programming screen:
Selected menu message
Setting items:
Use the cursor to select the desired option or touch it on the screen.
To enter the data for each option, follow the instruction shown below.
Numeric entry: Use numeric keys.
Character entry: Use character keys.
Selective entry: Press the
.
key to toggle options and press
the
E
key to select it, or press the
s
key to
show the options list. Use the cursor keys to
move the cursor and press the
E
key to
select it, or touch the option on the screen.
Code title
Code number and its description:
(In case of PLU/EAN and customer, two lines are used for one
code, upper line - code, lower line - description.)
Use the cursor keys or numeric keys to select the desired option
and press the
E
key, or touch the option on the screen. (When
you select the last item, the screen goes to the selected option
screen without pressing the
E
key.)
(In case of PGM2)
Programming menu: Use the cursor keys or numeric keys to
select the desired option and press the
E
key, or touch the
option on the screen.
Mode you are in
Numeric key area
Common status area
Numeric key data area