Filter
Top Products
C H A P T E R 3
Usingyour interactive whiteboardsystem
17 smarttech.com/kb/170510
Setting Use Notes
Disable Volume
Control
Disables the projector’s volume
control and the ECP’s volume
control knob.
Disables the projector’s volume
control.
System Output
Selects one or more speakers or
other audio device.
Select Line Out+Speaker, Line Out Only or
Speaker only.
Projector Functions menu
3D On/Off Turns the DLPLink technology
3D feature on or off.
The default is off.
3D Format Displays the current 3D format
(Interleaved or Under-over).
Interleaved breaks down the image frame for
each eye, alternately displaying a line of visual
information from each frame.
Under-over concurrently displays horizontally
stretched image frames for each eye, one
above the other.
3D Invert
Left-Right
Selects the 3D Invert setting
(L-R or R-L).
L-R displays visual data for the left eye first.
R-L displays visual data for the right eye first.
Auto Signal
Detect
Enables or disables signal
searching of input connectors.
The default is off.
Select On to have the projector continuously
switch inputs until it finds an active video
source.
Select Off to maintain signal detection in one
input.
Lamp Reminder Turns the lamp replacement
reminder on or off.
This reminder appears 100 hours before the
recommended lamp replacement.
Lamp Mode Adjusts lamp brightness to
Standard or Economy.
Standard displays a high-quality, bright
image.
Economy increases the lamp life by
decreasing the brightness of the image.
Auto Power Off
(minutes)
Sets the length of the auto
power-off countdown timer
between 1 and 240 minutes.
The default is 120 minutes.
The timer begins to count down when the
projector no longer receives a video signal.
The timer finishes when the projector enters
Standby mode.
Select 0 to turn off the timer.
Zoom Adjusts the zoom to the center
of the image in or out from 0 to
30.
The default is 0.
Zooming in cuts off the outer edges of the
source video.