Filter
Top Products
A P P E N D I X B
Remotelymanagingyour systemthrough anRS-232serialinterface
74 smarttech.com/kb/170510
Setting Use Notes
V-Position Moves the vertical position of
the source video up or down
from -5to 5 (relative to the
projected image).
Don’t adjust this setting unless you’re advised
to by SMARTSupport.
Apply this setting only after you make all boom
adjustments.
This setting applies to VGA inputs only and is
useful in situations where the source video is
cut off.
White Peaking Adjusts the image color
brightness from 0 to 10 while
providing more vibrant white
shades.
A value closer to 0 creates anatural image and
a value closer to 10 enhances brightness. The
default is 10.
Degamma Adjusts the color performance
of the display from 1 to 3.
The default is 2.
Color Adjusts the Red, Green, Blue,
Cyan, Magenta and Yellow
colors on the projector from 0 to
100 to provide custom color and
luminance output.
Each color has adefault value of 100.
Adjustments to the color settings register
under the User mode.
Audio menu
Volume Adjusts the projector’s volume
amplification from -20 to 20.
The default is 0.
Mute Mutes the projector’s audio
output.
The default is off.
If you mute the projector’s audio output and
then increase or decrease the volume, the
volume is restored automatically. You can
prevent this from happening by disabling the
volume control.
Disable Volume
Control
Disables the projector’s volume
control and the ECP’s volume
control knob.
Disables the projector’s volume
control.
System Output
Selects one or more speakers or
other audio device.
Select Line Out+Speaker, Line Out Only or
Speaker only.
Projector Functions menu
3D On/Off Turns the DLPLink technology
3D feature on or off.
The default is off.