Filter
Top Products
A P P E N D I X A
Remotelymanagingyour systemthrough anetworkinterface
51 smarttech.com/kb/170510
Submenu setting Description
Aspect Ratio Adjusts the image output to Fill Screen, Match Input or 16:9.
l
Fill Screen produces an image that fills the entire screen by
stretching and scaling.
l
Match Input matches the projector’s aspect ratio to the input’s
aspect ratio. As a result, black bands might appear along the top
and bottom edges of the screen horizontally (letterbox format) or
along the left and right edges of the screen vertically (pillarbox
format).
l
16:9 changes the output to 16:9 by letterboxing the image, which
is recommended for use with HDTV and DVDs enhanced for
wide-screen television.
N OT E
See Video format compatibility on page 81 for appearance
descriptions in each mode.
Startup Screen Sets the type of startup screen to SMART orUser. The SMART
screen is the default SMART logo on a blue background. The User
screen uses the saved picture from the Capture User Startup Screen
function.
High Speed Fan Adjusts the speed of the projector’s fan. Select High orNormal.
N OT E
Use the High setting when the projector’s temperature is high or the
altitude is above 6000' (1800 m).
Projector Mode Adjusts the projection mode to Front, Ceiling, Rear or Rear
Ceiling.
I M P O R T A N T
SMART recommends that you never change this setting from the
Ceiling projection mode.
Source Adjusts the input source to VGA, HDMI1 or HDMI2.
SMART Fixed Install (FI) /
SMART Desktop mode (DT)
User defined tag not currently used, reserved for future application.
HDMI1 Assigns an alternative name to your HDMI1 input, which appears
when you select the HDMI1 input.
HDMI2 Assigns an alternative name to your HDMI2 input, which appears
when you select the HDMI2 input.
VGA1 Assigns an alternative name to your VGA 1 input, which appears
when you select the VGA 1input.