Filter
Top Products
A P P E N D I X C
Integratingother devices
85 smarttech.com/kb/170510
To connect a DVD/Blu-ray player or similar device
1. If you have speakers installed, turn the volume dial on the ECP all the way down to prevent
buzzing or popping.
2. Press the Input button on the ECP or remote control to switch input sources to the peripheral
device.
3. Restore the volume on the ECP’s volume dial.
N OT E
HDMI inputs are High Definition Content Protection (HDCP) compliant.
To connect a second projector
The SMARTUX80 projector allows synchronization between two adjacent systems. The two
projectors can be connected with a Cat 5crossover cable to allow the control of the power states
through a single ECP, through the remote control orthrough a room control system.
1.Connect a Cat 5crossover cable to the Projector 2port of the primary SMARTUX80 projector and
into the Projector 2 port of the secondary SMARTUX80 projector.
N OT E
The Projector 2 ports only synchronize power states and don’t carry audio or video.