Filter
Top Products
Set base unit for line spacing
Mode ASCII
Decimal Hexadecimal
IBM
[
<ESC> “ “ ‘1”
<4>
<o> 27 91 92 4 0 IB 5B 5C 04 00
<O> <O> <O>
n
o
OOn 00 00 00 n
Setsthe baseunitforthelinespacingcommands,<ESC>“3” and
cESC>“J”.Ifthevalueof n is 180,thebaseunitis setto 1/180”.If
the value of n is 216, the base unit is set to 1/216”.If otherwise
specified,thiscommandisignored.Thiscommandbecomeseffec-
tiveonly after<ESC>“3”or <ESC>“J” is received,The default
baseunit is set to 1/216”.
Set line spacing to nl180 inch or n/216 inch
Mode ASCII
Decimal Hexadecimal
Both
<ESC>
“3” n
27 51 n
IB
33 n
Sets the distance the paper advances or reverses in subsequent line
feeds torz/180
inchor n/216inch,wherenis betweenOand255.If
n=0,in Standardmodetheline-feeddistanceis setto O,butin IBM
modethis commandis ignored.
Set line spacing to n/60 inch or n/72 inch
Mode
ASC114 Decimal
Hexadecimal
Both <ESC> “A” n
27 65 n
IB 41 n
In Standardmode,setsthedistancethepaperadvancesor reverses
insubsequentlinefeedsto n/60inch,wheren isbetweenOand255.
If n =0,the line spacingis setto O.
In IBM mode, this commanddefinesthe distancethe paper ad-
vancesor reversesin subsequentlinefeedsto n/72inch,wheren is
between1and85.Thenewlinespacingdoesnottakeeffectuntilthe
next<ESb “2” command.
62