Filter
Top Products
I
Set base unitfor line spacing
Mode ASCII
Decimal
Hexadecimal
IBM
<ESC> “[” ‘\”
<4> <0>
27 91 92 4 0
IB 5B 5C 04 00
<0> <o> )1/ n2 o
0 n/ /12 00 00 n/ n2
Sets the base unit for the line spacing commands, <ESC> “3” and
<ESC> “J”, according to the values of
nl and n2 as shown below.
If other values specified, this command is ignored. This command
becomes effective only after <ESC> “3” or <ESC> “J” is received,
The default base unit is set to 1/216”.
nl
n2
Base unit
O 180 l/180-inch
O 216 l/216-inch
1 104 l/360-inch
Setline spacing to nl180 inch, n1216inch, or n1360inch
Mode ASCII
Decimal
Hexadecimal
Both <ESC> “3” n
27 51
n
IB 33 n
Sets the distance the paper advances or reverses in subsequent line
feeds to rdl 80 inch,
n/216 inch,or n/360 inch, according to the de-
finedbaseunit.Thevalueof
nisbetweenOand255.Ifn=0, inStandard
mode the line-feed distance is set to O, but in IBM mode this
command is ignored.
Set line spacing to n160inch or n172inch
Mode ASCII
Decimal
Hexadecimal
Both
<ESC> “A” n
27 65 n
IB 41
n
In Standard mode, sets the distance the paper advances or reverses
in subsequent line feeds to
n/60 inch, where n is between Oand 255.
If
n = O,the line spacing is set to O.
In IBM mode thiscommand defines thedistance the paper advances
or reverses in subsequent line feeds to
n/72 inch, where n isbetween
1and 85.The new linespacing doesnottakeeffect untilnext <ESC>
“2” command.