Filter
Top Products
I
Switches C-3 to C-5: Page Length
Leave these switches ON if you will be using 11-inchforms. You will
need to change the switches ifyou willbe usinga different page length
as shown below:
Page Length
C-3
c-4
c-5
11inches/Letter ON ON ON
8 inches OFF ON ON
11.7 inches/A4 ON OFF
ON
12 inches OFF OFF ON
8.5 inches/Letter ON I ON
OFF
14 inches/Legal OFF
ON OFF
10.5 inches/Executive ON
OFF
OFF
7.25 inches/Executive
OFF
OFF
OFF
Switch D-1: Character Table
The action of this switch depends on the mode chosen with switch
A-1.
Move this switch OFF to select Italiccharacter table with theStandard/
Epson emulation mode. If you leave this switch to the ON position, in
place of italics you will get the graphic characters, international char-
acters, and mathematical symbols of IBM character set #2.
In the IBM emulation mode, ON selects character set #2, which has
international characters and fewer control words.
OFF selects character set #1, for computers with a 7-bit interface.
Switches D-2 to D-4: IBM Code Page or International Character Set
Except in the Standard Italic character set, these switches select the
default character code page as shown below:
IBM Code Page
D-2
D-3
D-4 IBM Code Page
D-2
D-3
D-4
#437 U.S.A. ON ON
ON #M3
CanadianFrench ON
ON
OFF
#850
Multi-1 ingual OFF ON
ON #865Nordic
OFF ON
OFF
#860Portuguese ON OFF ON (Reserved)
ON OFF
OFF
#861Icelandic OFF OFF ON (Reserved)
OFF OFF
OFF
53