Filter
Top Products
1
chapter 5
DEFAULT SETTINGS-EDS MODE
From the control panel you can change the parameters that define how your
printer works. These parameters become your power-on settings. This
function is called the Electronic DIP Switch (EDS) mode.
HOW TO SET THE EDS MODE
The EDS mode in this printer has 16functions that you can setas the power-
on default.
Turn the printer on while simultaneously holding the -, EEECHl,and
EJECT/PARKI buttons.
The “EDS” message will show on the LCD display. This indicates that you
have entered the EDS mode.
In EDS mode. the buttons on the control panel are used as shown below in
Figure 5-1.
k=
I I 1 1 r’
Select Selec( Change
Print Exit
B~ink Switch setting
c The LCD display on the control panel shows the current setting, ON or
OFF.
Use the I
EJECTIPARKI button to change the settings.
● Press the I PAPERFEED1button to print the current settings.
● Press the 1
ONLINE
]
button to save and exit the EDS mode.
49