Filter
Top Products
Loading the paper
1. Place a stack of fanfold paper behind and below the printer.
2. Turn the printer’s power OFF.
3. Pull the release lever toward the front of the printer ( ~ ). This has the
effect of releasing the paper from the platen roller, and engaging the
tractor feed.
4 Open the mute cover on the front cover, as shown in Figure 3-4.
, Release level
Figure 3-4. Opening the mute cover and correct lever position.
5. Open the rear cover using the two grips on either side, as in Figure 3-5.
Figure 3-5. Opening the rear cover.
6. Pass the paper between the printer case and the rear cover.
23