Filter
Top Products
Switch B-2: Paper-out
When this switch isOFF the printer ignoresthe paper-out detector and
prints down to (and beyond) the bottom edge.
Switch B-4: This switch is used for technical purpose only. Leave this
switch ON.
Switch B-5: Printable area
This printer can use two types of printing area format for single sheets
(cut forms).
By putting the switchON (“Type A“), thetop of the first lineofprinting
will start 1/6inchfromthe topofthe paper, andtheprinted area willend
1/6inch from the bottom of the paper.
Byputtingthe switch OFF (“Type B“),the firstlineofprinting willstart
at one inch from the top of the paper, and the printed area will end to
print 6 mm from the bottom of the printer.
Switches C-1 and C-2: Print Mode
These switches select the default print pitch and the fonts as shown
below.
Print Mode
c-1 c-2
10CPI DRAFT
ON ON
IOCPIHS DRAFT ON
OFF
17CPI DRAFT
OFF
ON
10CPILQ OFF
OFF
NOTE: If you change these switches after you have saved a macro,
these new settings will override the macro setting.
52