![](http://pdfasset.owneriq.net/c/1c/c1c6848d-05bb-44f2-9f7e-6912c316f2ac/c1c6848d-05bb-44f2-9f7e-6912c316f2ac-bg17.png)
3. Make sure that the ribbon is positioned between the print head and the
print head shield as shown in Figure 2-8.
4. Take the slack out of the ribbon again by turning the tension knob.
r
Figure 2-8. Make sure that the ribbon is positioned correctly.
Installing the front cover
After you have installed the ribbon cartridge, re-install the front cover.
1. Insert the tabs into the slots on the printer case.
2. Swing down the rear of the front cover to close it.
Figure 2-9. Installingthe frontcover.