Filter
Top Products
I
11.Turn on thepower usingthe switch locatedat thefront of theprinter. The
printer will beep, indicating that thepaper isnot yetfully loaded. A “PE>’
message will also flash on the LCD display to confirm this.
Mute cover
Figure 3-8.Closethe rear coverand the mutecover,then set the paper
guide horizontally
12.Now pull the bail lever toward the front of the printer. The paper will be
fed and adjusted past the print head to a position ready for printing.
er
Figure 3-9. Pull the bail lever toward the front of the printer to load paper.
NOTE: Do not return the bail lever backward. The bail lever automatically
returns toitsoriginal position after the paper goesthrough underthe
bail lever location.
13.If you want to set the paper to a different position, set theprinter off-line
by pressing the !
ON LINE
J
button, then set the paper by using the
micro-feed function. (For details, refer to Chapter 4.)
25