Sun Microsystems CP3260 Server User Manual


 
5-1
CHAPTER
5
Hardware Functional Descriptions
This chapter contains the following sections:
Section 5.1, “Hardware Architecture” on page 5-1
Section 5.2, “Hardware Modules” on page 5-4
5.1 Hardware Architecture
The Netra CP3260 blade server is an ATCA node board based on the UltraSPARC T2
processor. It is hot-swappable to an ATCA midplane and supports dual
10/100/1000BASE-T Ethernet interfaces as Base interface, and 10-Gb XAUI or 1-Gb
SERDES Ethernet interfaces as Fabric interfaces to support a redundant Dual Star
topology.
FIGURE 5-1 is a block diagram of the Netra CP3260 blade server. The blade server
functions can be broken down into subsystems consisting of:
CPU and memory subsystem
Service processor subsystem
I/O subsystem
IPMI subsystem
Power subsystem