A-4 Netra CP3260 Blade Server User’s Guide • April 2009
A.4.1.1 Ethernet Port
The Ethernet connector is a RJ-45 connector. The controller autonegotiates to either
10BASE-T, 100BASE-T, or 1000BASE-T. The Ethernet connector pin numbering is
shown in
FIGURE A-2.
FIGURE A-2 Ethernet RJ-45 Connector
TABLE A-1 shows the Ethernet connector pin assignments.
A.4.1.2 Dual USB Port
The dual-port Universal Serial Bus (USB) connector pin numbering is shown in
FIGURE A-3.
TABLE A-1 Ethernet Port Connector Pin Assignments
Pin
Signal
Name Function Pin
Signal
Name Function
1 BI_DA+ Bi-directional pair +A 5 BI_DC− Bi-directional pair +C
2 BI_DA− Bi-directional pair −A 6 BI_DB− Bi-directional pair −C
3 BI_DB+ Bi-directional pair +B 7 BI_DD+ Bi-directional pair +D
4 BI_DC+ Bi-directional pair −B 8 BI_DD− Bi-directional pair −D
1 2 3 4 5 6 7 8
...
<>
Link LED (green)
Activity LED (yellow)