A-10 Netra CP3260 Blade Server User’s Guide • April 2009
For information about multiplexing to Zone 2 or Zone 3, see Section 4.8,
“Multiplexing to Zones 2 and 3” on page 4-27.
A.4.5 Sun Netra ARTM Connectors (Zone 3)
The Netra CP3260 blade server provides all the I/O and power connections for rear
access through the Zone 3 RTM connectors. The Zone 3 I/O connectors are shown in
FIGURE A-7 and the Zone 3 power connector is shown in FIGURE A-8. The pin numbers
and signal assignments are listed in the associated tables.
FIGURE A-7 Zone 3 Signal Connectors
4 N/C N/C N/C N/C N/C N/C N/C N/C
5 N/C N/C N/C N/C N/C N/C N/C N/C
6 N/C N/C N/C N/C N/C N/C N/C N/C
7 N/C N/C N/C N/C N/C N/C N/C N/C
8 N/C N/C N/C N/C N/C N/C N/C N/C
9 N/C N/C N/C N/C N/C N/C N/C N/C
10 N/C N/C N/C N/C N/C N/C N/C N/C
TABLE A-6
Zone 2 J20 Connector Pin Assignments (Continued)
RowABC DEFGH
J31
J32
J33