Filter
Top Products
Chapter 3 Software Installation 3-7
■ time_zone = US/Pacific
■ locale = en_US
■ name_service = NIS
■ name_server = nameserver_host
■ \ (backslash) is a line continuation character indicating that the command is
continued on the next line.
You must type your superuser password again after typing this command. The
installation process should take roughly 5 minutes per client and about 15-30
minutes for the operating environment service to install; however, no progress is
displayed on screen while the process is running. Do not cancel or kill the process
until the process has successfully completed.
You should see messages similar to the following after a few minutes, confirming
that the command went through successfully the second time:
6. Boot the diskless client.
3.3.3 Determining Local Network IP Addresses and
Host Names
Collect the following information to connect hosts to the local area network (LAN).
Ask your network administrator for help, if necessary. You can use
TABLE 3-1 to
record this information. This information is not needed for a standalone installation.
Login to client_host as user root was successful.
Download of com.sun.admin.osservermgr.cli.OsServerMgrCli from client_host was
successful.
TABLE 3-1 Local Network Information
Information Needed Your Information
IP address
*
and host name for each Sun
Netra CP3260 client
Domain name
Type of name service and corresponding
name server names and IP addresses—for
example, DNS and NIS (or NIS+)
Subnet mask