Filter
Top Products
1-8 Netra CP3260 Blade Server User’s Guide • April 2009
1.3 System Configurations
Netra CP3260 blade servers can be installed in an ATCA shelf (or chassis), as shown
in
FIGURE 1-3. The blade servers can be deployed in various electrical configurations
to suit each end-user requirement. For example, the blade server can be configured
to boot from a network as a diskless client with either a front panel or RTM network
connection, or from an optional Compact Flash card. Also, a Netra CP32x0 SAS
Storage ARTM, Dual HD can be installed to provide local disk I/O, which can be
used optionally as a boot path.
5 Compact Flash connector
6 UltraSPARC T2 processor (under heat sink)
7 FB-DIMMs
Figure Legend