Sun Microsystems CP3260 Server User Manual


 
Chapter 1 Introduction 1-3
PICMG
compliance
Single-wide ATCA module
ATCA 8U form factor
Single-wide ATCA module
6-HP slot width
PICMG 3.0 R1.0
PICMG 3.1 R1.0
Node board
support
Functions as a CPU node board with the Solaris operating system and
software packages
Operating
system
Solaris 10 8/07 OS and subsequent compatible versions with supported
Netra patches
Internal I/O
(connections to
ATCA
midplane)
Dual 10/100/1000BASE-T Ethernet for Base interfaces
10-Gb XAUI or 1-Gb SERDES Ethernet interfaces as Fabric interfaces
Dual IPMI channel connects to the midplane for communicating with
the Shelf Management card
External I/O One 10/100/1000BASE-T Ethernet maintenance port on front panel
One asynchronous serial port for console on front panel
Dual USB 2.0 compliant ports on the front panel
Rear access available on Netra CP32x0 ARTMs:
One 10/100/1000BASE-T Ethernet port (RJ-45)
One asynchronous serial port (RJ-45)
Note - With a Netra CP32x0 ARTM installed, both the front panel and
ARTM serial ports are active. Either serial port can be used; but only one
of the serial ports can be used at a time.
IPMI system
management
Uses IPMI communications with baseboard management controller
(BMC); performs advanced system monitoring (ASM) on local board
interface (for example, temperature sense, FRU ID, and control)
Hot-swap
support
Board hot-swap support.
Front panel
access I/O
One 10/100/1000BASE-T Ethernet port (RJ-45)
Dual USB 2.0 compliant ports
One serial port (RJ-45)
Rear access
interface
Common rear transition module (RTM) interface supporting the Sun
Netra CP32X0 ARTMs
Compact Flash
support
Compact Flash socket to support a Sun 8-Gbyte or 16-Gbyte user flash
type I/II memory card
Building
compliance
Network Equipment Building Systems (NEBS) Level 3
Flash update Supported from downloaded file
TABLE 1-1 Netra CP3260 Blade Server Feature Summary
Feature Description