Filter
Top Products
Chapter 2 Hardware Installation 2-21
FIGURE 2-7 Installing Blade Server Into Chassis Slot
6. Push the blade server slightly into the midplane connectors, and then close the
latches to seat the blade server in the connectors (
FIGURE 2-8).
7. When the lower latch is closed, the blue Hot-Swap LED blinks while the blade
server is initializing. The blue LED turns off and the green OK LED lights when
the blade server is ready.
8. Tighten the locking screws to ensure the blade server is secured into the shelf
(
FIGURE 2-8).