Chapter 4 Firmware and Blade Server Management 4-13
error-reset-recovery boot, none,
sync
boot Specifies recovery action after an error reset.
Default is
boot.
•
none – No recovery action.
•
boot – System attempts to boot.
• sync – Firmware attempts to execute a
Solaris
sync callback routine.
fcode-debug? true, false false If
true, include name fields for plug-in
device FCodes.
input-device keyboard,
virtual-console
virtual-console Power-on input device.
load-base 0-n 16384 Address.
local-mac-address? true, false true If
true, network drivers use their own
MAC address, not the server MAC address.
network-boot-arguments [protocol,]
[key=value, ]
none Arguments to be used by the PROM for
network booting. Defaults to an empty
string.
network-boot-arguments can
be used to specify the boot protocol
(RARP/DHCP) to be used and a range of
system knowledge to be used in the process.
For further information, see the
eeprom
(1M) man page or your Solaris Reference
Manual.
nvramrc variable-name none Command script to execute if
use-nvramrc? is true.
oem-banner? true, false false If true, use custom OEM banner.
oem-logo? true, false false If
true, use custom OEM logo; otherwise,
use Sun logo.
output-device screen,
virtual-console
virtual-console Power-on output device.
screen-#columns 0-n 80 Sets number of columns on screen.
screen-#rows 0-n 34 Sets number of rows on screen.
scsi-initiator-id 0-15 7 SCSI ID of the Serial Attached SCSI
controller.
security-#badlogins variable-name none Number of incorrect security password
attempts.
security-mode none, command,
full
none Firmware security level.
TABLE 4-2 OpenBoot Configuration Variables
Variable Possible Values Default Value Description