Filter
Top Products
Chapter 1 Introduction 1-15
■ Serial terminal or terminal emulation for console output.
■ Cables for terminal and network connections.
■ Optional AMC disks and PCI-E cards.
The following are ATCA and other minimum requirements met by the Netra CP3260
blade server.
■ ATCA system enclosure for 8U boards (includes chassis, midplane, power supply)
■ Console output device or serial terminal
■ Boot device (such as hard drive, network, or Compact Flash card
■ Peripheral device for network access
■ Intelligent Platform Management Controller (IPMC)
1.6.2 Software Requirements
The Netra CP3260 blade server supports Solaris 10 8/07 OS and subsequent
compatible versions
Refer to the Netra CP3260 Blade Server Product Notes (820-0455) for more Solaris OS
information, including a list of the required software patches. You can view and
download the latest version of this manual at the following web site:
http://docs.sun.com/app/docs/prod/netra.brds
1.7 Technical Support and Warranty
Should you have any technical questions or support issues that are not addressed in
the Netra CP3260 blade server documentation set or on the web site, contact your
local Sun Services representative. This hardware carries a one-year return-to-depot
warranty. For customers in the US or Canada, call 1-800-USA-4SUN (1-800-872-4786).
For customers in the rest of the world, find the World Wide Solution Center nearest
you by visiting our web site:
http://www.sun.com/service/contacting/solution.html
When you call Sun Services, be sure to indicate if the Netra CP3260 blade server was
purchased separately and is not associated with a system. Have the proper blade
server identification information ready. Be prepared to give the representative the
blade server part number, serial number, and date code (
FIGURE 1-5).