Filter
Top Products
Operator’s Checkout Procedure
1760 Series Component Waveform/Vector Monitor User Manual
2-18
8. Filter Selection
The 1760--Series offers several filter selections for the
waveform display.
Ensure that the instrument is operating in waveform mode.
Enter the
FILTER menu (FLAT is selected by the factory
preset). Select
LUM filter. This provides a low-pass-filtered
display of the luminance portion of the signal. See
Figure 2-7.
10S/DIV
FLAT
LUM
CHROM
DIFF
R--Y
SCH R--Y
F+L
F+L+C
Figure 2-7. Two-Line LUM filter display of color bar signal.
Select CHROM. This provides a bandpass-filtered display of
the chrominance portion of the signal. See Figure 2-8.
Select
F+L (FLAT plus LUM). The flat display is superim-
posed on the luminance-filtered display (overlay is selected
by the factory preset). Press the appropriate bezel button
(not the front-panel
PARADE button) to select parade. The
flat display is now on the left, followed by the luminance-fil-
tered display.