Filter
Top Products
Using the Menus
1760 Series Component Waveform/Vector Monitor User Manual
3-20
Configure Menu
Push the CONFIG button to display the configure menu,
shown in Figure 3-6. Turn the left bezel control to select
INPUT, VECTOR, FORMAT, STANDARD, OFFSET, CALIBRATE,
REMOTE
, or REFERENCE (a box appears around the selec-
tion). Following are descriptions of ea ch sel ection.
INPUT
H COUPLING — Selects AC or DC coupling for
rear-panel inputs.
H
DC RESTORER —Selects the clamp speed. Slow
will clamp while displaying any hum.
H
CLAMP—Selects the point of the video signal that is
clamped to 0. Can be set for
ST (sync tip) or BP
(back porch).
VERTPOS
HORIZPOS
CLEAR
MENU
Bezel
Buttons
Left Center Right
INPUT
VECTOR
FORMA T
STANDARD
OFFSET
CALIBRATE
REMOTE
REFERENCE
COUPLING
AC DC
DCRESTORER
SLOW FAST
CLAMP
ST BP
A123
COMPOSITE
COMPONENT
B123
COMPOSITE
COMPONENT
Figure 3-6. The CONFIGURE menu display with INPUT selected.