Filter
Top Products
Functional Overview
1760 Series Component Waveform/Vector Monitor User Manual
3-6
Overlay
OVERLAY superimposes the selected input signals. In OVER-
LAY
mode, the LINE/FIELD button remains a four-way toggle,
providing one line, two line , one fie ld, and two field dis-
plays.
Sweep
Sweep buttons are used to select the waveform sweep rate.
LINE/FIELD toggles through four sweep rate selections: one
line, two line, one field, and two field. In
PARADE mode, the
LINE/FIELD button becomes a two-way switch, toggling be-
tween line and field.
The sweep rate is displayed in the upper right corner of the
CRT (for field-rate sweeps, 1 F or 2 F is displayed).
The
MAG button is used with LINE/FIELD to provide horizontal
magnification of each rate as follows:
H One line magnified = 200 ns/division
H Tw o line magnified = 1 µs/division
H One field or two field magnified = approximately
X20 magnification.