Filter
Top Products
Using the Menus
1760 Series Component Waveform/Vector Monitor User Manual
3-19
Recall
Use the left bezel control to select (outline) a preset for re-
call. Push
RECALL to recall the stored instrument configura-
tion.
Recover
Push
RECOVER to restore the front-panel setup that was in
effect before
RECALL was pushed.
Store
To begin storing a setup, push
STORE. Make sure the front-
panel controls are set as desired, and use the left bezel con-
trol to select the storage location (shown outlined).
Push
STORE IT to store the current front-panel settings at the
outlined
PRESET location. (Push the bezel button corre-
sponding to
RETURN if storing is not desired. This wil l can-
cel and exit the
STORE operation.)
Rename
Selecting
RENAME will provide an on-screen display, assign-
ing the center and right bezel controls to
LOCATION and LET-
TER
. Turn the center control to select the letter that will be
changed (move the box to the desired location within the
preset name). Turn the right control until the selected letter
changes to the desired new letter.
Push
RETURN if renaming is not desired. All changes to t he
name will be cancelled.
When the change has been made satisfactorily, select
AC-
CEPT
to store the new name.