Filter
Top Products
Installation
Page 13
Windows 98
1. Please insert the driver CD supplied and, when the "Found New Hardware Wizard"
recognises the new Modem, click Next to search for the driver.
2. Select the "Search for the best driver your device. [Recommended]" and click "Next" to
continue.
3. Select the "Specify a location" option and type "D:\" where D:\ is the letter of your CD
ROM drive. Click "Next" to start the search for your driver.
4. Click "Next" to start the installation.
5. Click "Finish".
Windows 2000
Driver Installation
1. Windows will detect the modem automatically. Please insert the Telenetics CD supplied and
click "Next".
2. Select "Search for a suitable driver for my device [recommended]", and then click "Next".
3. Select "Specify a location" and click "Next".
4. Enter the driver location "D:\" where D:\ is the letter of your CD ROM drive and click on
"OK".
5. Windows will find the correct driver for your modem. Click "Next" to continue.
6. When the "Digital Signature Not Found" screen appears, click "Yes" to continue.
7. Click "Finish" to end this procedure.
Windows ME
1. Please insert the Telenetics CD supplied and, when the "Found New Hardware Wizard"
recognises the new Modem, select "Specify the location of the driver [Advanced]" and click
"Next" to search for the driver.
2. Select "Search for the best driver in these locations" and choose "Specify a location".
Type in "D:\" (where D:\ is the letter of your CD ROM drive) and click "Next" to continue.
3. Click "Next" to start the installation.
4. Click "Finish" to end this installation procedure.