Filter
Top Products
Page 260
4800, or 2400
12 ■ V.90 56000, 54667, 53333, 52000,
50667, 49333, 48000,
46667, 44000, 42667,
41333, 40000, 38667,
37333, 36000, 34667,
33333, 32000, 30667,
29333, 28000
56 K56flex 56000, 54000, 52000,
50000, 48000, 46000,
44000, 42000, 40000,
38000, 36000, 34000,
32000
64 Bell 103 300
69 Bell 212 1200
-Q0 Disable MNP10 fallback to V.22bis
or V.22
-Q1 ■ Enable MNP10 fallback to V.22bis
or V.22 with MNP10
-DATE Time & Date
-LOG Call Log
:E0 Disable the V.32 compromise
equaliser
:E1 ■ Enable the V.32 compromise
equaliser
CIC Connect Incoming Call
CIC Accept an incoming call after the
DIC command has been issued
CRN Dial
CRS Dial Stored Number
DIC Disregard Incoming Call
PRN Stored Phone Number
RST Reset the modem and restore the
saved configuration profile
Distinctive Ring Commands
-SDR=n,x where n=0 to 7, default=0,
x=0 Disable Distinctive Ring response suffix;
x=1 Enable Distinctive Ring response suffix
(default)
Dial Modifiers
D Dial
, Pause
; Return to local command state
R Reverse mode
@ Wait for quiet answer
J Initiate MNP 10 at 1200 bps
M Initiate MNP 10 at 4800 bps
K MNP 10 cellular option
L Last number redial
F or ^ Disable calling tones
! Hook flash
S=n Dial stored phone number n
W Wait for dial tone
S Registers
Reg Function
Default
Range
0 Rings Before Answer
0
0-255
1 Ring Count
0
0-255
2 Escape Sequence Character
43 (the + character)
1-255
3 Carriage Return Character
13
0-127
4 Line Feed Character
10
0-127
5 Backspace Character
8
0-127
6 Dial Tone Wait Time
4
4-7
7 Wait for Carrier
30
1-60
8 Pause Dial Modifier Delay
4
1-7
9 Carrier Detect Response Time
6
1-255
10 Lost Carrier/Hang Up Delay
18
1-255
11 DTMF Tone Timing
95
70-254
12 Escape Sequence Guard Time
50
3-255