Filter
Top Products
S Registers
Page 221
ATS26 RTS/CTS Delay
If the RTS (Request To Send) signal is asserted when operating in synchronous mode, the
modem will wait for the period defined by S Register 26 before asserting the CTS (Clear To
Send) signal, when &R0 is selected.
Values in this register are in tenths of a second.
Examples
ATS26=15 Wait 1.5 seconds after RTS has been asserted before asserting CTS.
Default
0
See Also
&R RTS/CTS Control
%R CTS Control
Range
0-255