Filter
Top Products
AT Commands
Page 81
ATA Answer
This command enables you to answer an incoming call manually. On receiving an incoming call,
the modem will send a RING message code to your computer. When you see the ring message:
• Type: ATA <E>
Your modem will send an answer tone to the calling (originating) modem and wait to receive a
carrier signal in return.
The B command selects which communication standards your modem will attempt to connect
to.
If a connection cannot be established with the originating modem within the time specified in S
Register 7, your modem will hang up and return a NO CARRIER message before returning to
the local command state.
Options
ATA Answer an incoming call
See Also
B command Select Communication Standard
S Register 0 Ring to Answer On
S Register 1 Current Ring Count
S Register 7 Wait Time for Carrier