Filter
Top Products
AT Commands
Page 155
AT%K CTS During Dial and Handshake
This command may be used with computers that expect the CTS signal to be raised when your
modem is connected to a remote modem and is ready to send data.
This command will interfere with the Abort Connection command (&N) if your computer
cannot send characters to the modem when CTS is low.
Options
AT%K0 ■ CTS operates normally
AT%K1 CTS is lowered when an ATD command is issued and remains low until a
connection is established
See Also
&N command Abort Connection
Range
0-1