Filter
Top Products
AT Commands
Page 171
☞☞
☞☞
☞
If a break sequence is received by the modem while it is in local command state
(and is maintaining a constant speed connection), the modem will not process the
break until it returns to on-line state.
If the break sequence is received by the modem while it is in local command state
and maintaining a variable speed connection, the break will be ignored. Breaks
received from a remote modem during an error corrected connection are handled
by your modem according to the setting of the \K command in the remote modem.
See Also
\B command Generate Break
Default
\K5
Range
0-5