Filter
Top Products
Page 178
AT\X XON/XOFF Pass Through
The \X command enables you to define whether XON and XOFF (software handshake)
characters are allowed to pass through the modem to the remote system.
The \X command only affects XON/XOFF characters sent from your computer to your modem.
It does not affect XON/XOFF characters sent from a remote system to your modem.
☞☞
☞☞
☞
When the modem is configured for XON/XOFF flow control, passing through XON/
XOFF characters may interfere with the modem’s control of data flow. It is usually
best to disable pass through.
The \X command only takes effect when XON/XOFF flow control is enabled (&K4).
Options
AT\X0 ■ Remove received XON/XOFF characters from received data
AT\X1 Pass through received XON/XOFF characters
See Also
&K command Flow Control
\Q command Extended Flow Control
Range
0-1