Filter
Top Products
Page 236
ATS71 Ignore Incoming Call
This S Register is only applicable when your modem is operating in V.25bis mode.
After an incoming call is detected, your modem will wait the number of seconds defined by S
Register 71, allowing you to issue the DIC command if you do not wish to accept the call.
For more details, refer to the section titled ‘Answering Calls’ which appears in the ‘V.25bis
Operations’ chapter.
Examples
ATS71=10 Wait 10 seconds before accepting an incoming call.
Default
0
See Also
CIC command Connect Incoming Call
DIC command Disregard Incoming Call
Range
0-30