Filter
Top Products
Page 190
<rb_signaling>
is an optional number which enable or disables robbed bit signaling generation in a server modem
or enables or disables robbed bit signaling detection in a client modem. The option are:
0 = Robbed bit signaling generation (server modem) or detection (client modem) disabled
(default)
1 = Robbed bit signaling generation (server modem) or detection (client modem) enabled
+MS? Reporting selected options
+MS=? Reporting supported options
Nn Automode
1. Use of the Nn command is not recommended but is provided for compatibility with existing
communication software.
2. This command is product dependant.
☞☞
☞☞
☞
The ATB command can be used instead of the AT+MS command to limit the
maximum speed.
Connecting with 56k technology
Connection speeds higher than 33600bps can only be obtained by calling an Internet Service
Provider (ISP) or Central Site which supports the Rockwell K56Flex or V.90 protocol. The
speeds at which you will be able to connect also depend on the quality of the telephone line
used for making the connection.