Filter
Top Products
AT Commands
Page 87
Dial Modifiers
Dial modifiers enable you to change the characteristics of dialling.
(Definitions for all modifiers appear on the following pages.)
Modifier Meaning
, pause
; return to local command state
R reverse mode
@ wait for quiet answer
J initiate MNP 10 at 1200 bps
M initiate MNP 10 at 4800 bps
K MNP 10 cellular option
L last number redial
F or ^ disable calling tones
! hook flash
S=n dial stored phone number n
W wait for dial tone
, Pause
This modifier orders the modem to pause before dialling the rest of the phone number. This is
useful when using a PABX and you need to dial a number to connect to an outside line.
For example: If you must dial 0 to connect to an outside line before dialling (09) 111-1234
• Type: ATD0,091111234 <E>
The length of the pause is determined by the value in S Register 8.
☞
UK Modems. If your PABX requires more than four seconds to obtain a line, add no more
than one extra , to your dial command.